Brand-new OEM Subaru EJ engine case for a Crawford built short block

Why Crawford Builds on Brand-New OEM Cases, Not Machined Used Blocks

Every Crawford motor starts the same way: a brand-new OEM case, still at its factory dimensions, that has never been run. No core. No used block bored out and put back in service. That is a deliberate choice, and it costs more than the alternative. This post is the reasoning, because the foundation is the one part of a build you cannot change later.

What a used case brings with it

A used case carries a history the buyer cannot see and machining cannot erase.

  • Heat cycles and overheating — a case that has been overheated has lived at temperatures its dimensions were not checked at. Decks and bearing saddles move. A surface can be re-cut flat; the stress history stays in the casting.
  • Detonation and bearing damage — the failures that kill Subaru motors do not happen politely. A spun bearing sends metal through every oil passage in the case. Detonation hammers the bores and the deck. Cleaning removes debris. It does not prove every passage is clear or every surface undamaged.
  • Prior machining — many used cases have already been bored, honed, or decked once. Each operation removes material and narrows what can be done next. A case already bored oversize has spent the standard-bore option — the pistons and rings for it are no longer the standard package.
  • Unknown mileage, unknown tune, unknown oil — the three things that decide how a case aged are exactly the three things a used case cannot document.

None of this means every used case is junk. It means its condition is a claim, not a measurement — and a build is only as honest as its foundation.

What machining can and cannot do

Machining corrects dimensions. It does not rewind history.

Boring a used case oversize fixes a scored bore by making every bore bigger — which changes the piston and ring package the build was designed around. Crawford builds the EJ at the standard 99.5 bore: the ring gaps are filed for that bore, and the piston package is designed for it. Decking a case restores flatness by removing material, which changes deck height and everything stacked on it. Align-honing restores the main bearing tunnel by removing material there too. Each fix is legitimate machine work. Stacked on an unknown case, they produce a foundation whose dimensions are a set of compensations — measured, but compensating.

A new OEM case needs none of it. The bores measure what they are supposed to measure. The decks are flat from the factory. The bearing clearances are set against saddles that have never spun a bearing. The build sheet starts at zero, not at an estimate of what the last owner's engine did.

The position, stated plainly

Crawford does not rebuild engines. There is no rebuild service, no teardown quote, and no machining menu for customer cores — every build starts from a brand-new OEM block, and no core is required or charged. The same rule holds at every tier: the EJ257 short block tiers at $4,999 / $5,599 / $5,999 and the long block tiers at $6,999 / $7,899.99 / $8,499 are all built on new cases, and the top tier is rated 720+ bhp on the factory semi-closed deck case — no closed-deck conversion, because the case was never the weak point. The internals were.

Cylinder heads are the one exception in form, not in principle: head packages start from brand-new OEM castings too, with no core charge. Where a long block program uses send-in heads, they are inspected and prepped to a pass/fail standard before they are assembled — inspected, not assumed.

What the buyer gets for it

  • A known starting point — every clearance on the build sheet was measured against a case at factory dimensions.
  • No core logistics — no deposit, no return freight, no waiting on a core refund. Your old motor is yours to sell, keep, or scrap.
  • The standard parts package — standard-bore pistons and rings, the package the build was designed around, with no oversize substitutions forced by a previous owner's damage.
  • The same warranty footing — every Crawford-built engine carries a 1-year / 12,000-mile warranty, with break-in and the first oil analysis as mandatory conditions: oil at 500 and 1,500 miles, 2,000–4,500 RPM varied, no more than 80% of target boost until break-in is complete.

The used-block route is cheaper on the invoice. It moves the cost into risk — the one component every other part depends on is the one with the unknown past. Crawford's answer is to remove the variable: new case, measured build, documented sheet.

Questions about a build: (855) 677-8243.

FAQ

Does Crawford rebuild engines? No. Crawford does not rebuild engines and does not machine customer cores. Every build starts from a brand-new OEM block.

Do I need to send in a core? No. No core charge, no core return, on short blocks, long blocks, and head packages.

Why not just bore a used block oversize? Boring fixes a damaged bore by changing the bore — the piston and ring package changes with it, and the case's heat and failure history stays. A new case starts at the standard bore the build was designed for.

Is a used case always bad? No. Its condition is unverifiable, which is a different problem. A build sold on measured clearances needs a foundation that can be measured from zero.

What does the new-case rule apply to? Every Crawford-built motor — EJ and FA short blocks and long blocks, including the BTO replacement line, which starts from a brand-new OEM short block with upgraded bearings.

Back to blog