Subaru Short Block Installation Kit: A Builder's Guide
Share
Building your own engine is a serious undertaking. The line between a powerful, reliable build and a catastrophic failure is often just a single missing gasket or a mismatched seal. This is where a high-quality Subaru short block installation kit becomes non-negotiable. It eliminates the guesswork by providing every essential component you need, all perfectly matched for your project. Think of it as your build's insurance policy, ensuring compatibility and preventing those frustrating, last-minute trips to the auto parts store. We'll show you exactly what makes these kits so critical for a successful and durable engine build.
Key Takeaways
- Choose a Complete Kit to Eliminate Guesswork: A short block installation kit is the most strategic way to approach an engine build. It bundles all the correct, compatible gaskets, seals, and hardware, saving you time and preventing the costly errors that come from sourcing parts individually.
- Match Your Build to Your Driving Goals: The right short block depends entirely on your specific Subaru model and how you plan to use it. Define your horsepower targets and driving style—whether for the street, track, or trail—to select a block with internals built to handle your specific demands.
- Protect Your Investment with a Meticulous Break-In: The first few hundred miles are the most critical for your new engine's lifespan. A patient break-in period, careful monitoring of temperatures and pressures, and a proactive maintenance schedule are essential for ensuring long-term reliability and performance.
What Exactly Is a Subaru Short Block Installation Kit?
If you’re planning to rebuild your engine or install a new short block, a Subaru Short Block Installation Kit is your best friend. Think of it as a comprehensive care package for your engine build. Instead of hunting down every single gasket, seal, and bolt individually, these kits bundle all the essential components you need for a smooth and successful installation. This saves you time, prevents guesswork, and ensures every part is designed to work together perfectly.
A Subaru short block is the foundation of your engine’s bottom end, and installing one correctly is critical for performance and reliability. Using a dedicated kit means you’re not reusing old, worn-out parts that could compromise your brand-new build. It’s the smartest way to protect your investment and set your engine up for a long, powerful life. Whether you're building a daily driver or a track-ready WRX, starting with a complete installation kit is a non-negotiable first step.
What's Inside the Box?
A quality installation kit comes with all the high-grade components needed to assemble your short block correctly. While contents can vary slightly, a typical kit from Crawford Performance includes crucial parts like new gaskets for the head, intake, and exhaust to ensure a perfect seal. You’ll also find a new oil pump and seal, high-strength ARP Head Studs for reliable clamping force under pressure, and specialized NGK spark plugs. To finish the job, the kit provides a K&N oil filter and the proper Motul Break-In Oil, which is essential for correctly seating the new piston rings and bearings.
Completing an OEM Short Block
Starting with an OEM Subaru short block gives you a solid foundation built to factory specifications. These blocks arrive with the crankshaft, rods, pistons, and bearings already assembled, which takes some of the most intricate work off your plate. However, it's just the starting point. Your job is to build it into a complete long block by adding the cylinder heads, timing components, oil pan, and all the supporting hardware. This is precisely where a comprehensive installation kit proves its worth. It ensures you’re using fresh, high-quality gaskets and seals to prevent leaks and new hardware that can handle the demands of a fresh build, giving you peace of mind that your new engine is sealed up tight and ready for action.
What to Expect from an OEM Block
An OEM short block is engineered to deliver factory-level performance and reliability. Because it comes pre-assembled from Subaru, you can trust that the core components fit together perfectly, which significantly reduces the risk of assembly errors. This makes it an excellent choice for a daily driver or a mild performance build where you want a dependable engine without pushing extreme power limits. For enthusiasts aiming for higher horsepower with their performance parts, it’s important to recognize the limitations of stock internals. While an OEM block is a reliable foundation, a purpose-built short block with forged components is the superior choice for handling the increased stress of track days or aggressive tuning.
Short Block vs. Long Block: What's the Difference?
Understanding the engine terminology is key to planning your build. A short block refers to the bottom half of your engine. It consists of the engine block itself, along with the core rotating assembly: the crankshaft, connecting rods, and pistons. In contrast, a long block is a more complete assembly. It includes the entire short block plus the top-end components, such as the cylinder heads, camshafts, and valvetrain. Knowing the difference helps you decide the scope of your project and which performance parts you’ll need to complete the job.
Why a Short Block Kit Is a Smart Move
When your Subaru's engine needs an overhaul or you're ready for a major power upgrade, a short block installation kit is a smart choice. It offers a strategic balance of cost, performance, and convenience, giving you a clear path to a stronger, more reliable engine. This approach is popular with Subaru enthusiasts for a few key reasons.
Save Money on Your Engine Build
Engine work can get expensive, fast. A short block installation kit is one of the most cost-effective ways to handle a major repair or performance build. Instead of replacing the entire engine, you're rebuilding its core with high-quality, matched components. This approach saves you significant money compared to a new crate engine. By bundling all essential gaskets, seals, and hardware, these Subaru short block installation kits also prevent the headache of hunting down dozens of individual parts. You get everything you need in one box, ensuring you don't overspend on forgotten or incorrect components.
Build a Foundation for Serious Power
A stock engine can only handle so much. A performance short block is engineered to provide a solid foundation for making more power, reliably. These built Subaru short blocks are assembled with stronger internals that withstand the increased stress from a larger turbo or aggressive tuning. They are known for lasting a long time, whether your car is a daily driver or a track machine. This means you can push for higher horsepower without constantly worrying about engine failure. A well-built short block delivers a noticeable performance increase and gives you a stronger platform to build upon as your goals evolve.
Horsepower Potential of Built Blocks
A built short block is your ticket to unlocking your Subaru’s true performance potential. These blocks are specifically designed with forged pistons, stronger connecting rods, and a balanced crankshaft to handle significantly more power than stock components. This robust foundation allows you to safely add more aggressive performance parts, like a larger turbocharger or an E85 fuel system, without risking catastrophic engine failure. By replacing the factory internals with components engineered for high stress, you create a reliable platform that can support ambitious horsepower goals, whether you're aiming for a responsive street car or a dedicated track build.
Immediate Power Gains
While the installation kit itself is a supporting player, a fully built short block delivers immediate results. On its own, a Crawford built short block can add around 19 horsepower right out of the box. More importantly, it creates the headroom for much larger gains. The real magic happens when you combine the built block with other upgrades and a professional tune. The installation kit ensures that every component works in harmony, allowing your new engine to handle the increased power safely. Proper engine tuning is the final step that ties everything together, optimizing fuel and ignition timing to maximize output and reliability.
Simplify the Installation Process
An engine build can feel intimidating, but a short block kit makes the process more straightforward. These kits are a complete, thoughtfully curated solution that removes the guesswork from sourcing parts. Everything from the main seals to the specific gaskets is included, ensuring perfect compatibility and preventing project delays. Because they come with detailed instructions, many enthusiasts can complete the installation themselves without hiring a mechanic. This saves on labor costs and gives you the satisfaction of completing the build yourself. You get a clear path to a successful and reliable engine assembly.
Crawford Performance
Crawford Performance has built a reputation on engineering and manufacturing exceptionally durable engine components. Our built Subaru short blocks are designed in-house to be incredibly strong and powerful, making them a top choice for Subaru WRX, STI, and BRZ owners. We focus on creating short blocks that deliver reliable performance whether you're on the track or using your car as a daily driver. This commitment to quality is why our components have been trusted in professional motorsports for years.
To support your build, we also developed the Crawford Short Block Installation Kit. This isn't just a random assortment of parts; it's a complete, thoughtfully curated solution designed to ensure your installation is successful and dependable from the start.
Technical Innovations and Support
What truly sets Crawford Performance apart is a deep-rooted history in engineering and manufacturing exceptionally durable engine components. Our built Subaru short blocks are designed in-house to be incredibly strong and powerful, making them a top choice for Subaru WRX, STI, and BRZ owners. We focus on creating short blocks that deliver reliable performance whether you're on the track or using your car as a daily driver. This commitment to quality is why our components have been trusted in professional motorsports for years, proving their strength under the most demanding conditions. When you choose Crawford, you're not just buying a part; you're investing in decades of race-proven innovation.
Warranty and Core Policy
A warranty is more than just a policy; it's a company's promise to stand behind its work. Crawford Performance offers a 12-month/12,000-mile warranty on our long blocks, which reflects our confidence in the quality of the engine components we manufacture and use in all our builds. This gives you peace of mind, knowing your investment is protected against defects in materials and workmanship. Crawford has no core policy. Every Crawford build starts from a brand-new OEM block — no core charge, no core return, and your old block stays yours.
Choosing Your Perfect Short Block Kit
Selecting the right short block is the most critical decision you'll make for your engine build. It’s the foundation of your Subaru’s performance, and getting it right means years of reliable power. Getting it wrong can lead to frustration and costly repairs. The key is to think through your needs before you even start browsing parts. By focusing on your specific model, your ultimate power goals, and how you actually drive your car, you can confidently choose a kit that will deliver the results you’re looking for.
First, Match the Kit to Your Subaru Model
Before you get lost in horsepower numbers and component specs, the first step is simple: confirm compatibility. A short block designed for a 2015 STI won't fit a 2022 WRX. Engine architecture, bolt patterns, and clearances change between models and generations. You need a kit specifically engineered for your vehicle’s year, model, and engine code, whether it’s an EJ257 in an STI or an FA20 in a WRX. Reputable manufacturers list compatible models for each kit, covering everything from the Subaru WRX and STI to the Forester and Crosstrek from 2002 to the present. Double-check this information to ensure a perfect fit and avoid installation headaches.
Confirming Fitment with Your VIN
The surest way to guarantee compatibility is to use your Vehicle Identification Number (VIN). While knowing your model and year is a great start, the VIN provides the exact details of your car's build, including the specific engine code and manufacturing date. This is crucial because Subaru sometimes makes mid-year changes that can affect component fitment. Providing your VIN when ordering performance parts allows the supplier to cross-reference their inventory and confirm you’re getting the correct kit for your engine. It’s a simple step that eliminates any doubt and ensures every gasket, seal, and bolt will match up perfectly, saving you from costly returns or project delays.
Support for Modern and Hybrid Engines
As Subaru engines evolve, so do the requirements for building them correctly. Modern direct-injection engines, like the FA20 and FA24 found in the newer WRX, operate with tighter tolerances and more complex systems than their predecessors. For these platforms, using a complete installation kit is more important than ever. Reusing old, stretched bolts or worn gaskets on a modern engine is a recipe for disaster. A dedicated kit provides fresh, high-quality components engineered to meet the demands of today's technology. This protects your investment in a new short block and ensures your engine is set up for a long, powerful life, giving you the reliability you need to push your Subaru WRX with confidence.
What Are Your Performance Goals?
Once you’ve narrowed down the compatible options, it’s time to get honest about your power ambitions. What are you trying to achieve? Are you looking for a reliable daily driver with a modest power increase, or are you building a dedicated track car that needs to handle extreme cylinder pressures? A quality short block can increase horsepower and improve engine smoothness even with the same tune, but they are rated for different power levels. Our built Subaru short blocks are designed in stages to match specific horsepower targets, ensuring the internal components can handle the stress you plan to throw at them.
Street or Track? Consider Your Driving Style
Your performance goals are closely tied to your driving style. How you use your Subaru day-to-day will determine the best internal components for your build. A car built for daily street driving needs to be reliable, smooth, and efficient in stop-and-go traffic. In contrast, a high-performance race build prioritizes strength and durability under sustained high RPMs and heat. This choice influences everything from piston material to bearing clearances. If you’re building an overlanding rig, you might prioritize low-end torque and durability over peak horsepower. Matching the short block to your primary use ensures you get the performance you need without sacrificing the drivability you want.
What Tools Do You Need for the Install?
A successful short block installation hinges on having the right tools for the job. While enthusiasm gets you started, precision tools will get you to the finish line without costly mistakes. This isn’t the time to make do with a basic socket set and a pair of pliers. A proper engine build requires specific equipment to handle the unique design of a Subaru Boxer engine and to ensure every component is torqued to spec. The difference between a reliable, high-performance engine and one that fails prematurely often comes down to the details—and those details are impossible to get right without the proper equipment.
Before you even think about unboxing your new short block, take the time to inventory your toolbox and prepare your workspace. A clean, organized garage and a complete tool collection are just as important as the high-quality parts you’re installing. We’ll walk through the essential tools everyone needs, the Subaru-specific items you can’t skip, and how to get your garage ready for the build. This preparation is the first step toward building a reliable engine that’s ready for the street, track, or trail.
Your Essential Tool Checklist
Think of this as your foundational toolkit. Having these items on hand will cover the majority of the disassembly and reassembly process. Don’t skimp on quality here, especially when it comes to measurement tools.
- Engine Hoist and Stand: You’ll need a hoist to safely remove and install the engine and a sturdy stand to work on it once it’s out of the car.
- Comprehensive Metric Socket Set: A high-quality set with a full range of sockets (deep and shallow), extensions, and universal joints is non-negotiable.
- Torque Wrench: You’ll need at least one calibrated torque wrench. A 1/2" drive for high-torque bolts and a 3/8" drive for smaller fasteners is an ideal combination.
- Piston Ring Compressor: This is essential for safely installing the pistons into the cylinders without damaging the rings.
- Feeler Gauges: You'll need these for checking critical clearances.
Subaru-Specific Tools You Can't Skip
The flat-four Boxer engine has a few quirks that require specialized tools. Trying to work around them with generic tools is a recipe for stripped bolts and damaged parts. These items are designed to make the job easier and prevent costly errors.
- Camshaft Sprocket Wrench: This tool is crucial for holding the cam gears in place while you loosen or tighten the bolts, preventing them from spinning.
- Crankshaft Pulley Tool: This holds the crank pulley steady so you can apply the proper torque to the main bolt.
- Wrist Pin Tool: A dedicated tool makes removing and installing the piston wrist pins much simpler and safer for the components.
Many of the necessary gaskets and seals are included in a dedicated short block installation kit, which is designed to complement the other performance parts in your build.
Get Your Garage Ready for Action
Your workspace can make or break your engine build. A clean, organized environment minimizes the risk of contamination, which is a leading cause of premature engine failure. Before you start, dedicate some time to setting up your garage for success.
Start by thoroughly cleaning your workbench and the floor around your engine stand. Lay down cardboard to catch any fluid drips. Good lighting is critical, so bring in extra shop lights to illuminate your work area. As you disassemble the old engine, use labeled bags or magnetic trays to organize every nut and bolt. This simple step will save you hours of frustration during reassembly. Finally, have assembly lube, brake cleaner, and plenty of clean shop towels within arm’s reach.
How to Handle Common Installation Problems
Installing a new short block is a major milestone for any build, but it’s also where small mistakes can have big consequences. The key to a successful installation is patience and an almost obsessive attention to detail. A tiny metal shaving, an incorrect torque value, or a misaligned timing mark can turn your brand-new engine into a very expensive paperweight. Taking the time to double-check your work at every step protects your investment and ensures you get the reliable power you’re aiming for. Let’s walk through some of the most common hurdles and how to clear them with confidence.
Avoid These First-Timer Mistakes
The biggest mistake you can make is rushing the job. When you’re re-installing old components onto your new short block, every part must be meticulously cleaned and inspected. It’s easy to get excited and hurry through the final steps, but this is where precision matters most. Follow your service manual to the letter, especially when it comes to torque specifications. Using a calibrated torque wrench is non-negotiable. Verifying every measurement and setting ensures all your performance parts work together correctly, giving your engine the longevity and power it was built for. Treat this process with the respect it deserves, and you’ll avoid costly do-overs.
Prevent Engine Contamination
A clean workspace is a happy workspace, and a clean engine is a healthy engine. Before you even think about bolting parts onto your new short block, you need to conduct a thorough inspection and preparation of every component. This means cleaning any old parts to remove grime, oil residue, and potential metal shavings. Any debris or contaminants introduced into the new engine can cause catastrophic failure down the road. A clean build is the foundation for reliable performance and is essential before any engine tuning services can be effective, so don’t cut corners on cleanliness.
Nail Your Timing and Alignment
Proper timing and alignment are absolutely critical for an interference engine like the Subaru Boxer. If your timing is off by even a single tooth, you risk pistons hitting valves, which means you’ll be tearing the engine apart again. Before you install the timing belt, triple-check that all your timing marks on the cams and crank are perfectly aligned. Using high-quality components like ARP head studs can also provide more reliable clamping force and head gasket sealing. This meticulous attention to detail during the final assembly is what separates a successful build from a disaster. It’s the last major hurdle before you can fire it up.
Caring for Your New Short Block
Getting your new short block installed is a huge milestone, but the job isn’t finished yet. The first few hundred miles are the most important in your engine's new life. Proper care during this initial phase sets the stage for long-term reliability and performance, ensuring your investment pays off for years to come. Neglecting these steps can lead to premature wear and catastrophic failure, turning your dream build into a nightmare.
Think of it like this: you’ve just built a solid foundation, and now you need to let it cure properly before you put any serious stress on it. This involves a meticulous break-in process, constant monitoring of vital signs, and a commitment to a proactive maintenance schedule. By focusing on these three areas, you’ll give your engine the best possible start.
Master the Critical Break-In Period
The break-in period is non-negotiable. This is when the piston rings seat against the cylinder walls, creating the tight seal necessary for compression and oil control. A proper break-in ensures maximum power and minimal oil consumption down the road. Your tuner or engine builder will provide specific instructions, but the core principles are universal: take it easy. This means no high RPMs, no full-throttle pulls, and absolutely no boost. You’ll also need to perform several early oil changes to flush out assembly lubricants and any microscopic metal particles from the new components. It’s a patient process, but it’s the single most important thing you can do for your engine’s longevity.
Monitor Your Engine Temps
During the break-in period and beyond, you need to watch your engine’s vitals like a hawk. A tiny metal shaving, an incorrect torque value, or a misaligned timing mark can turn a brand-new engine into a very expensive paperweight. Keep a close eye on your oil temperature, coolant temperature, and oil pressure gauges. Any sudden spikes or drops are a red flag to shut the engine off immediately and investigate. For any performance build, especially on a Subaru, investing in quality performance parts like an upgraded radiator or an oil cooler is a smart move to keep temperatures stable under load. Consistent, stable temps are the sign of a healthy engine.
Plan Your Long-Term Maintenance
Once you’re past the break-in period, your focus should shift to a consistent maintenance routine. A modified Subaru requires more frequent attention than a stock one. Don’t rely on the manufacturer’s recommended service intervals. Instead, create a schedule based on your driving style and power level. This includes regular oil changes with high-quality synthetic oil, periodic checks for fluid leaks, and inspecting belts and hoses. It’s also crucial to work with a professional for routine engine tuning services to ensure your air-fuel ratios and other parameters remain optimized. Proactive maintenance is the key to protecting your investment and enjoying reliable power for years.
Debunking Short Block Installation Myths
An engine build can feel like a big commitment, and it’s easy to get overwhelmed by conflicting advice online. Whether you're building a daily driver or a dedicated track car, you’ve likely heard stories that make the process sound either impossible or deceptively simple. The truth is usually somewhere in the middle. Let's clear the air and tackle some of the most common myths surrounding short block installations. Understanding these points will help you approach your project with confidence and a realistic set of expectations.
A successful engine build for your Subaru WRX or STI isn’t about luck; it’s about preparation, quality components, and meticulous work. By separating fact from fiction, you can avoid common pitfalls and set yourself up for a reliable, powerful engine that delivers on its promise.
Myth: The Install Is Too Difficult
Let’s be honest: pulling an engine apart can feel like a monumental task. The idea of tackling a short block installation yourself can be intimidating, but it’s far from impossible. The key is using a comprehensive kit that removes the guesswork. A quality short block installation kit isn't just a box of parts; it's a complete, thoughtfully curated solution designed to make your build successful and reliable. With detailed instructions and all the necessary gaskets, seals, and hardware in one place, you can focus on executing each step correctly instead of chasing down part numbers. While it demands patience and attention to detail, the process is straightforward for a mechanically inclined enthusiast.
Myth: You'll Have Warranty Issues
The fear of voiding your car’s factory warranty is a major concern for many owners. While it’s true that installing aftermarket parts can affect your coverage—especially if a failure is traced back to that part—it doesn’t have to be a dealbreaker. Reputable manufacturers understand this concern and stand behind their products. For example, we provide a unique 12-month/12,000-mile warranty on our built engines, giving you peace of mind that goes beyond the factory terms. The best approach is to partner with a company that not only provides high-quality parts but also offers a warranty to protect your investment.
Understanding Kit vs. Assembled Block Warranties
When you're investing in your engine, understanding the warranty is crucial. A professionally built Subaru short block from a manufacturer like Crawford Performance comes with a comprehensive 12-month/12,000-mile warranty, which is a testament to the quality of the assembly. This type of warranty covers the craftsmanship of the build itself, from bearing clearances to torque specs, giving you confidence that your engine is ready for the road or track. It protects your investment by ensuring the core of your build is backed by the experts who put it together, so you can focus on the rest of your project.
An installation kit, however, has a different kind of warranty. While the individual components are covered against manufacturing defects, the warranty doesn't cover the final assembly—that part is on you or your chosen shop. This is a critical distinction because any issues arising from improper installation, like incorrect torque specs or contamination, will not be covered. This is why starting with a complete kit is so important. It provides a thoughtfully curated solution that eliminates guesswork with incompatible parts and helps you avoid the common mistakes that could lead to engine failure and potential warranty complications.
Myth: It's a Magic Bullet for Power
A built short block is the foundation of a high-performance engine, but it doesn't create power in a vacuum. Simply dropping in a new block without addressing the supporting systems won't get you the results you want. In fact, a tiny metal shaving, an incorrect torque value, or a misaligned timing mark can turn a brand-new engine into a very expensive paperweight. To truly realize the potential of your build, you need a holistic approach that includes other quality performance parts and, most importantly, a professional tune. Expert engine tuning services ensure all your components work together safely and efficiently to deliver reliable power.
What's the Real Cost of a Short Block Install?
When you’re planning an engine build, the price tag on the short block itself is just the starting point. The total investment includes the installation kit, fluids, potential machine shop services for your heads, and labor—whether that’s your own time or a professional’s. Thinking about the full picture from the start helps you budget properly and ensures you have everything you need to do the job right the first time. This isn’t just a repair; it’s a major upgrade that lays the foundation for your Subaru’s future performance.
DIY vs. Professional Installation Costs
Deciding between a DIY or professional install is one of the biggest factors affecting your total cost. If you go the DIY route, you’re trading money for time. You’ll need a comprehensive set of tools, a clean workspace, and a deep understanding of the EJ or FA engine. The risks are high—a tiny metal shaving or an incorrect torque spec can turn your brand-new engine into a very expensive paperweight.
Hiring a professional shop adds labor costs, but it provides expertise and peace of mind. An experienced technician has the specialized tools and knowledge to handle the job efficiently and correctly. Most reputable shops also offer a warranty on their labor, protecting your investment. For a build this critical, professional engine tuning services are also essential to ensure your new engine runs safely and performs at its peak.
Related Articles
- Subaru Short Block Installation Kits - Crawford Performance
- Subaru Short Block Installation Kits (Spanish) - Crawford Performance
- Subaru Short Block Installation Kits (German) - Crawford Performance
Frequently Asked Questions
Do I really need to buy a full installation kit? Can't I just reuse some of my old parts? While it might seem like a good way to save a few dollars, reusing old gaskets, seals, and bolts on a new short block is a major risk. These parts are designed for a single use and can stretch, compress, and wear out over time. Putting old, fatigued components on a fresh engine build compromises the integrity of the seals and can lead to leaks or even catastrophic failure. A complete kit ensures every part is new, fits perfectly, and provides the reliability your investment deserves.
What's the main advantage of a "built" short block over a standard OEM one? A standard OEM short block is engineered to handle factory power levels and everyday driving. A "built" short block is specifically designed for higher performance. It uses stronger internal components, such as forged pistons and connecting rods, that can withstand the increased cylinder pressures and stress from aggressive tuning, higher boost, and track use. It’s about creating a durable foundation that allows you to make significantly more power, reliably.
Is a professional tune absolutely necessary after the installation? Yes, a professional tune is a critical final step that you should never skip. Your car's ECU is calibrated for your old engine's specifications. A new short block, especially one with different components, changes how the engine breathes and operates. A tuner will adjust the fuel, timing, and boost parameters to match the new hardware, ensuring the engine runs safely and efficiently. Without a proper tune, you risk poor performance and severe engine damage.
How long should I expect the engine break-in process to take? A proper break-in is essential for your engine's long-term health and typically lasts for the first 1,000 miles. During this period, you should avoid high RPMs, hard acceleration, and boost. The goal is to vary the engine speed under light load to allow the new piston rings to seat correctly against the cylinder walls. This process also involves a few early oil changes to flush out assembly lubricants and tiny metal particles from the new components.
Will installing a new short block automatically give me more horsepower? A new short block itself doesn't create horsepower; it enables it. Think of it as building a stronger foundation for your house. The foundation itself doesn't add a new room, but it allows you to build a second story safely. A performance short block is built to handle the stress of other power-adding modifications like a larger turbo, an upgraded fuel system, and an aggressive tune. The power gains come from those supporting parts, which the built block makes possible.
Related reading: CSF Radiators for Subaru WRX and STI