CSF Radiators for Subaru WRX and STI: All-Aluminum, 2-Row, and the Oil-Cooler Option
Share
Every factory Subaru radiator ends the same way: the plastic end tanks heat-cycle for a decade, go brittle, and crack — usually on the hottest day of the year. CSF's answer is a radiator with no plastic in it. Crawford carries the CSF line for the 2008–2015 and 2022+ WRX and STI.
Why All-Aluminum
A plastic tank is crimped to the core; an aluminum tank is TIG-welded to it. The weld doesn't embrittle, doesn't seep at the seam, and can be repaired if it ever does. CSF adds a thicker, higher-efficiency core than stock, so the replacement isn't just tougher — it cools better, which is the margin a tuned or tracked car spends.
The Line
- CSF 1-Row 31mm High-Performance Aluminum Radiator — WRX and STI 2008–2015 — $415.00. The stock-replacement-plus: all-aluminum, sized like factory, the right call for a street car whose plastic tank is on borrowed time.
- CSF 2-Row 42mm High-Performance Aluminum Radiator — WRX and STI 2008–2015 — $485.00, also in black as the Race-Spec. The 42mm two-row core is the built-engine and track-day choice — more coolant volume and more surface area.
- CSF All Aluminum Radiator — WRX 2022–2027 — $608.76, or black at $590.00. The VB's version of the same formula.
The Oil-Cooler Option
This one carries a plate-type oil cooler in the tank. Engine oil temperature is the number Subaru didn't give you a gauge for, and on a turbo car it climbs with boost and stays there. Tying oil cooling into the radiator package handles both fluids in one install — worth it on any 2008–2015 car that sees track time or sustained load. Oil health is a theme here: pair it with the discipline in our oil analysis guide.
When to Replace
Don't wait for the crack. Brown, brittle-looking plastic tanks, white coolant crust at the crimp seam, or a car past ten years on the original radiator are all the warning you get. A radiator is cheap insurance next to an overheated engine — a warped-head repair costs more than every radiator on this page combined.
FAQ
Does the 42mm core fit the stock fans and hoses? CSF builds these as drop-in replacements for the listed applications — factory mounts, fan shrouds, and hose positions. The thicker core is tighter to the engine; check your clearances if you run aftermarket piping.
Do I need the 2-row on a street car? The 1-row covers street duty with margin. The 2-row earns its price with boost, heat, and track time — or in genuinely hot climates.
Black or polished? Same radiator. Black rejects a little more heat at the surface and disappears in the bay; polished is the show finish. Choose on looks.
Should I replace hoses and the thermostat at the same time? Yes. The system is open and drained; hoses, clamps, thermostat, and fresh coolant turn a repair into a reset of the whole cooling system.
Related reading: cooling the charge air is the other half of cooling the engine — see the AMS intercooler guide for the VB WRX.