AMS Intercoolers for the 2022+ WRX: Front Mount, Top Mount, and Charge Pipes
Share
Charge temperature is power left on the table. The VB WRX's factory top mount does its job at stock boost, but heat soak on a hot pull is physics, not opinion — and once the intake charge gets hot, the ECU pulls timing to protect the engine. AMS Performance builds the VB's intercooler upgrades, and Crawford carries the line.
Front Mount: The Full Answer
- AMS Front Mount Intercooler Kit (incl. Charge Pipes) — WRX 2022–2027 — $1,758.04. The complete kit: a large front-mount core where the airflow actually is, with the full charge pipe set included. This is the intercooler for a VB that's getting a bigger turbo, sustained track work, or both — the core volume and placement end the heat-soak conversation.
Top Mount: The Direct Upgrade
- AMS Top Mount Intercooler — WRX 2022–2027 — $824.06. A larger, more efficient core in the factory position: no pipe rerouting, no bumper surgery, the shortest charge path preserved. For a street VB on the stock turbo or a mild build, this is the proportionate answer.
Charge Pipes
- AMS Charge Pipe (OEM TMIC Only) — WRX 2022–2027 — $604.29, and the standard Charge Pipe at $549.35. The factory plastic charge pipe is a known weak link under raised boost — it cracks and it leaks. Aluminum ends that, and a charge pipe that seals is worth more than one that flows: a boost leak costs more power than any pipe gains. If your VB loses boost or whistles under load, start with our boost leak guide before you buy anything.
The Rest of the AMS VB Line
- AMS Performance Air Intake — WRX 2022+ — $181.26. (An intake changes MAF scaling — it goes on with a tune. The full picture is in our intake guide.)
- AMS Stainless Steel Brake Lines, Front & Rear — WRX 2022+ — $207.91, and the Stainless Steel Clutch Line at $58.25 — the same braided-line logic for the clutch hydraulics.
- Engine-bay finishing: Fender Shrouds at $129.39, an Engine Pulley Cover at $109.83, and the Billet Engine Oil Dipstick at $93.34 (with STI 2006–2021 and VA WRX versions at the same price).
FAQ
Front mount or top mount for a street car? Top mount, honestly. It keeps throttle response crisp with the short charge path and handles stock-turbo power without drama. The front mount earns its cost when boost, turbo size, or track time goes up.
Does an intercooler need a tune? An intercooler alone is a cooling part — the tune isn't required the way it is for an intake. But a tune is how you collect the power the cooler charge makes available, and any build at this level should be tuned as a package regardless.
Will the front mount hurt response? A larger core and longer pipes add a small amount of volume to fill. On a stock-turbo street car you'll notice it; on the builds the FMIC is made for, the turbo fills it without thinking. Match the part to the car.
What breaks first on the stock setup? The plastic charge pipe, then the top mount's ability to shed heat on repeated pulls. Fix in that order if you're staging the build.