Crawford-built Subaru engine

Crawford Performance WRX: The Ultimate Upgrade Guide

A WRX or STI build starts with a goal. Track car, daily driver, or something in between — the goal decides the parts, and the order matters. Protection first, then the foundation, then power. This guide walks the Crawford path in that order.

One fact about Crawford belongs up front, stated once: Crawford Performance is the only aftermarket manufacturer ever factory-backed by Subaru of America, and Crawford built the engines for the Gymkhana 1 and 2 cars. Everything below is the product line that record produced.

Start with the Air Oil Separator

Push a turbo Subaru harder and crankcase pressure climbs. That pressure forces oil vapor into the intake, where it lowers the effective octane of the fuel, coats the intake tract, and raises the risk of detonation. An air oil separator manages that vapor: it separates the oil from the air, sends clean air back to the intake, and returns the oil to the crankcase.

Crawford developed the original closed-loop Subaru AOS. The unit is aluminum, made in the USA with USA components, and it drains back automatically — there is no can to empty. It is the first upgrade on any WRX or STI we would build, stock or modified, because it protects the engine before anything adds stress to it. The Crawford AOS carries no CARB EO, so check the EO status for your application.

See the WRX and STI parts collection for AOS fitments by year.

The Foundation: Built Short Blocks and Long Blocks

Past the stock limits, the engine itself is the build. Crawford engines start from brand-new OEM blocks — no core required or needed, and no used case goes back into service. Short blocks and long blocks are both available, in built and BTO (Better Than Original) lanes, with CrawfordSPEC JE forged pistons. Crawford-built long blocks ship free.

The current EJ line, rated:

  • CrawfordSPEC CSS 540 — 450 whp / 540 bhp
  • Club Racer CCR 660 — 550 whp / 660 bhp
  • Racer Spec CRS 720+ — 600+ whp / 720+ bhp

For the FA20 DIT in the 2015–2021 WRX, the Crawford short block is rated at 660 hp. The legacy stage-named EJ blocks — S2 (450 whp), S3L-X (550 whp), and S3L-X FSR (600+ whp) — are named as what they are: legacy blocks, under their own names and ratings.

A built engine is not optional equipment for a big-turbo build. Stock internals have a ceiling, and pushing past it with a larger turbo and an aggressive tune is how engines fail. The block rated for your target goes in first; the supporting parts follow.

Break-In and Warranty

Every Crawford built engine carries a 1-year / 12,000-mile warranty. The conditions are not fine print — they are the break-in:

  • Oil changes at 500 and 1,500 miles
  • Engine speed between 2,000 and 4,500 RPM, varied
  • No sustained cruising and no full-throttle pulls
  • Do not exceed 80% of target boost until break-in is complete
  • The first oil analysis is mandatory — it is a warranty condition

Questions on a build: (855) 677-8243.

Exhaust: Cat-Back and Gymkhana Axle-Back

A high-flow exhaust lets the engine move gases out faster, which is the other half of breathing. Crawford's WRX and STI exhausts come in two lanes: full cat-back systems, and the Gymkhana axle-back line, named for the cars that made the sound familiar. Either way the gain is honest — response and sound first, modest power — and the fitment is generation-specific, so order for your exact car. Crawford-made parts carry one price, labeled MSRP.

Browse the range in WRX upgrades.

Turbo and Intake: The Supporting System

A larger turbo and freer intake path are how a built engine gets fed — but they are supporting parts, not the foundation, and Crawford does not sell them. Two rules govern this end of the build. First, the block goes in before the turbo, not after the failure. Second, any change to airflow requires a professional tune, or the engine runs lean on hardware it was never calibrated for. Crawford does not sell tuning; a tune by a Subaru specialist is a mandatory line item in any build budget, not an optional one.

Suspension, Brakes, and the Crosstrek Exception

Power is only usable if the car turns and stops. Brakes and suspension sized for stock power get outrun quickly as output climbs, and they should be budgeted alongside the engine work. Crawford does not sell brakes or suspension for the WRX and STI, and this guide will not pretend otherwise.

The one chassis product Crawford does build is for the Crosstrek: a 2-inch lift kit that adds ground clearance and room for larger tires, with the approach and departure angles that make a Crosstrek genuinely more capable off pavement.

Choosing the Package for Your Build

For the track: start with the AOS, then the block rated above your target — a 400 whp goal belongs on a CSS 540, not on a stock short block — then exhaust, supporting systems, and the tune. Durability at sustained load is the whole point.

For the daily driver: the AOS and an exhaust change the car without changing its manners. That is a complete, honest build for most owners, and it leaves the door open.

For the money: spend on the foundation first. A quality AOS and, when power is the goal, a properly rated block cost less than one engine failure. Cheap generic parts cost more in the end — in fitment problems, in performance that never shows up, and in repairs.

Related Reading

Frequently Asked Questions

What's the first upgrade you recommend for a WRX or STI? The air oil separator. It protects the engine at any power level, and it goes on before anything that adds stress. Exhaust is the usual second step. Intake and exhaust changes come after, and any of them that alter airflow need a professional tune.

Do I really need a built engine before adding a bigger turbo? For significant gains, yes. Stock components have limits, and a larger turbo with aggressive tuning pushes past them. A built short block or long block rated for your target is the foundation that makes the rest of the build safe to run.

What does the engine warranty cover? Crawford built engines carry a 1-year / 12,000-mile warranty against defects in materials and workmanship. Break-in and the first oil analysis are mandatory conditions of that coverage.

Are Crawford parts a good fit for a daily driver, not a race car? Yes. The same properties that hold up on track — durability and precise, model-specific engineering — are what a daily driver needs. The AOS and exhaust route improves the car without touching its reliability.

Back to blog