Crawford Baja off-road parts on a Subaru

Crosstrek Wheel Offset for Off-Road Fitment, Explained

Offset is the number that decides where the tire sits in the wheel well, and it is the number most people guess at. On a Crosstrek built for dirt, the wrong offset means rubbing at full lock, tires clipping fenders on compression, or a stance that looks right and wears bearings wrong. Here is what the number actually does.

What offset means

Offset is the distance, in millimeters, between the wheel's mounting face and its centerline. Positive offset tucks the wheel inward toward the strut. Lower or negative offset pushes it outward toward the fender. Factory Crosstrek wheels are high positive — typically in the +48 to +55 mm range — because Subaru tuned the car for efficiency and clearance at the strut.

Why off-road builds go lower

Moving the wheel outward does three useful things:

  • Strut clearance: a wider all-terrain tire gains room on the inside, where it would otherwise rub the strut or spring perch.
  • Stance and stability: a wider track plants the car on off-camber dirt.
  • Fender clearance at the top: paired with the right tire size, the shoulder of the tire clears the liner through travel.

What it costs

Nothing is free. Push the wheel out and the scrub radius changes — steering gets heavier and follows ruts more. Wheel bearings carry more leverage and wear faster. The tire's outer shoulder swings a wider arc, so a setup that clears straight ahead can still rub at full lock or full compression, and the tires throw more mud down the side of the car. Most Crosstrek off-road setups land in the +15 to +35 mm range as the working compromise — out enough for tire clearance, not so far out that the steering and bearings pay for it daily.

Offset does not work alone

Offset, tire diameter, tire width, and ride height are one system. A taller tire on a low-offset wheel at stock height rubs; the same tire on the same wheel with a 2-inch lift clears. That is why the fitment question is never just "what offset" — it is offset at your lift height with your tire size. Our Crosstrek 2-inch lift tire size guide works through the tire half of that equation.

The practical method

  1. Pick the tire first — size and width for the terrain you drive.
  2. Pick ride height — stock, or lifted with geometry correction.
  3. Choose offset last, to put that tire where it clears: usually +15 to +35 mm for off-road Crosstrek builds.
  4. Test at full lock and full compression before the trail does it for you.

Wheels live alongside the rest of the platform parts in the Crosstrek overland and off-road collection. Get the order right and the fitment question answers itself.

Offset is one half of the fitment picture — suspension travel is the other: see the Crosstrek suspension upgrade guide and the Crawford 2-Inch Lift Kit for the 2018–2023 Crosstrek it is built around.

Back to blog