Crawford-built Subaru engine

Crosstrek Suspension Upgrades: What Actually Helps

Most Crosstrek suspension questions are really one question: how do I carry more, clear more, and stop beating the car up on dirt — without ruining how it drives every other day? Here is the honest order of operations.

Start with what the suspension is being asked to do

A stock Crosstrek is tuned for pavement efficiency. Off-road use asks for three things it was not given: ground clearance, wheel travel used gently instead of harshly, and the ability to carry camping or overland weight without sitting on the bump stops. Upgrades that do not serve one of those three are decoration.

Lift: clearance, done with geometry intact

A lift kit raises the body for clearance and bigger tires. The part most people miss is what happens underneath: lift the body on the struts alone and the CV axles and control arms run at steeper angles full-time, which wears joints and boots. A subframe drop corrects that — it spaces the drivetrain and suspension pickup points down with the lift, keeping axle angles close to stock. It is the difference between a lift that lasts and a lift that eats CV boots.

Our full breakdown of axle angles after a lift is here: CV axle angle after a lift kit. Crawford's own answer for this platform is the 2-inch lift kit for the 2018–2023 Crosstrek, and the full range sits in Crawford lift kits.

Load: springs and bump stops tell the truth

Roof tents, drawers, water, and a swing-out carrier add hundreds of pounds the stock springs never planned for. The symptoms are sag, bottoming on dirt roads, and headlights aimed at the sky. Heavier-rate springs or helper solutions matched to your real loaded weight fix it — matched being the operative word. Spring for weight you do not carry and the empty car rides harsh and tops out.

Dampers and bushings: buy them when they are done

Struts are wear items. If yours are seeping or the car bounces twice after a bump, replacements come before anything fancy. Same for bushings — tired bushings let alignment wander, and no upgrade downstream fixes wander. Inspect first; spend where the wear actually is.

Alignment is part of the upgrade

Any lift changes camber and toe. Budget the alignment with the lift, not after the tires start wearing. A Crosstrek that chews front tires after a lift is almost always a skipped alignment, not a bad kit.

The order that works

  1. Inspect struts, bushings, and boots — replace what is worn.
  2. Lift with geometry correction (subframe drop).
  3. Springs matched to your real carried weight.
  4. Alignment, then tires sized to the clearance you actually gained.

The rest of the platform's parts live in the Crosstrek overland and off-road collection. Build the suspension around the trips you actually take and it stops being a compromise car — it just becomes the car that goes.

Once the suspension is sorted, tire fitment is next: the Crosstrek 2-inch lift tire size guide covers what fits, and the wheel offset guide covers where the wheel sits.

Back to blog