DeatschWerks Fuel Pumps and Regulators for Subaru: DW300C, DW430C, and the DWR1000
Share
A motor can only make the power its fuel system can feed. Crawford builds the motors — the built EJ257 short blocks and the rest of the built line — and Crawford does not make fuel pumps or regulators. The shelf that feeds those motors is DeatschWerks: in-tank pumps for the current WRX, the install hardware to put them in, and regulators for return-style systems. This is the line, with fitments and prices from the live listings.
In-tank pumps for the 2022–2024 WRX
Two compact pumps, both built for the VB WRX (2022–2024) and both replacing the factory in-tank pump:
- DW300C — 340 lph, $189.00. The step up from stock for a tuned street car that has outgrown the factory pump's headroom.
- DW430C — 430 lph, $219.00. The bigger pump, for builds that will use the flow — higher boost, larger injectors, or ethanol blends in the plan.
Pick by where the build is going, not where it is. A pump is cheap to oversize once and expensive to buy twice, and a fuel system that runs out at the top of a pull is a lean motor at the worst possible moment.
Install hardware
- DW300c Install Kit — $39.00. The fittings and hardware for installing the matching pump in the 2022–2024 WRX.
- Universal Fuel Pump Setup Kit — $21.00. Filter sock, wiring, hose, and hardware for in-tank DW200, DW300, and DW65c installs across applications.
Order the kit with the pump. The install is the wrong time to discover which fittings you don't have.
Regulators for return-style systems
The DWR1000 line is for return-style EFI systems: adjustable base pressure with a boost reference port, so fuel pressure rises with manifold pressure.
- DWR1000iL in-line regulator — $169.00. In-line, anodized black, rated to support fuel systems up to 1,000 hp.
- DWR1000c regulator kit — $209.00. The regulator with a pressure gauge and fittings — 6AN or 6AN and 8AN — for a return-style build that needs the pressure set and verified on the gauge.
These are universal-fit parts, not WRX-specific. They belong in a planned return-style conversion, not a stock returnless car.
The tune is part of the fuel system
A pump or regulator change alters what the injectors see, and the calibration has to match it. Treat any fuel-system change as a tuning change: Crawford recommends Delicious Tuning for e-tuning — the same recommendation we make in our Subaru intake guide, where the VB fuel and air changes meet. Plan the pump, the regulator, and the tune as one job.
Questions on fitment: (855) 677-8243.
Frequently asked questions
Which pump does a tuned 2022–2024 WRX need?
The DW300C (340 lph, $189.00) covers a tuned street build. The DW430C (430 lph, $219.00) is the pick when the build is headed for more boost, bigger injectors, or ethanol.
Do the pumps fit other Subarus?
The DW300C and DW430C listings are built for the 2022–2024 WRX. The regulators and the universal setup kit are universal-fit parts for return-style and in-tank installs respectively.
Do I need the install kit?
The VB-specific install kit ($39.00) carries the fittings and hardware for the pump swap in the 2022–2024 WRX. Order it with the pump.
Does a bigger fuel pump add power?
No. A pump restores headroom — it lets the injectors deliver what the tune asks for. Power comes from the motor and the calibration; the fuel system's job is to never be the limit.
Do I need a tune after changing the pump?
Plan on it. Fuel delivery is a calibration input. Crawford recommends Delicious Tuning for e-tuning.