The Ultimate Performance Exhaust System Guide
Share
The factory exhaust on your Subaru is a compromise. It is built to be quiet and cheap to produce, and that creates backpressure — resistance that restricts how fast exhaust gases can leave the engine. A performance exhaust replaces it with wider-diameter piping, smoother bends, and less restrictive mufflers. The path out gets clearer, the engine cycles more efficiently, and the car sounds like a boxer should.
What it does not do is work miracles. An exhaust is a sound and breathing upgrade with modest power in it, not a transformation. This guide covers the system types, the materials, the costs, and the install, so you can buy the right one once.
Performance vs. Stock
The difference is priorities. The stock system is engineered to meet noise targets and manufacturing costs. It quiets the engine first and flows second. A performance system reverses that: flow first, with the sound managed by muffler and resonator design rather than by restriction. The gains are real but modest — quicker throttle response, some horsepower and torque, and a note worth hearing.
Why Upgrade
Power and torque. Larger piping and high-flow mufflers reduce backpressure, so the engine expels gases more easily and produces more power with every combustion cycle. On naturally aspirated cars, a full header-back system is quoted at 10 to 30 horsepower. Treat any exact number as marketing. Crawford makes no dyno claim for its exhausts.
Sound. The boxer rumble is the point for most buyers. Cat-back systems deliver a fuller, richer note. Axle-back systems are a subtler step up from stock. Muffler and resonator design decides where a system lands between the two.
Throttle response. An engine that does not have to push against its own exhaust answers the pedal faster. This is the improvement drivers feel most, every time they drive.
Weight. Factory systems are heavy, thick-walled steel. Aftermarket systems in T304 stainless weigh less, and titanium weighs less still — a premium titanium system can be less than half the weight of its stainless counterpart, with total weights around 15 pounds. Weight off the rear of the car helps handling, braking, and acceleration.
The Systems
Cat-back. Replaces everything from the catalytic converter to the tips: mid-pipe, resonator, and muffler. It is the all-around choice — a noticeable improvement in flow and the full exhaust note, with the factory catalytic converters left in place. Most WRX and STI owners land here.
Axle-back. Replaces only the muffler and tips, from the rear axle back. Smaller, cheaper, and easier to install. The gain is sound, not power: an axle-back is worth one or two horsepower at most. It is the right first step if the stock muffler is the only thing you want gone. The differences are spelled out in our cat-back vs. axle-back guide.
Turbo-back. Replaces every component from the turbocharger to the tailpipe, including the downpipe. This is the freest-flowing option and the most involved install. It also changes airflow enough that a professional tune is mandatory, not optional. Running a turbo-back without one can leave the engine running lean and do real damage.
Header-back. The naturally aspirated equivalent of a turbo-back, for cars like the Crosstrek and Impreza. It replaces everything from the exhaust headers to the tips. Same rule as the turbo-back: hardware this extensive requires a professional tune to run safely.
Valved. A butterfly valve redirects exhaust flow on demand. Closed, gases route through the muffled path and the car is quiet. Open, they take the straight-through path and the car is loud. One system, two sound profiles — useful for a car that commutes during the week and runs hard on weekends.
Straight piping. Removing the muffler makes a car loud and raw, and that is most of what it does. Without a tune the power gains can be negligible, low-end torque can suffer, and the drone on a daily drive gets old fast. A well-engineered system gives a better balance of sound and response.
Crawford's Exhausts
Crawford builds cat-back systems for the WRX and STI and the Gymkhana axle-back line, including the Gymkhana 2 for the 2013–2016 BRZ/FR-S/GT86 and the Gymkhana 3 for the 2018+ Crosstrek. The design priorities are flow, a clean resonant tone that fits the car's character, and no excessive drone at cruising speed. Crawford makes no dyno claim for its exhausts; an axle-back is a sound part worth a horsepower or two, and the cat-backs are sold on the same honest basis. Crawford-made parts carry one price, labeled MSRP. Browse the line in the WRX upgrades collection. Questions: (855) 677-8243.
What to Look For
Material: T304 vs. 409 Stainless
Most quality aftermarket systems are T304 stainless steel. Its higher chromium and nickel content resists rust and discoloration, which matters anywhere roads get salted. A T304 system keeps its finish and outlasts the car it is bolted to.
T409 stainless is the budget alternative. It is a step up from the aluminized steel in most factory systems and holds up structurally, but its lower chromium content means it develops surface rust over time. It will not stay shiny. Choose on priorities: T304 for longevity and appearance, T409 for a lower price.
Whatever the material, judge the welds. Clean, strong welds last. Poor ones crack and leak, and a leak costs the performance you paid for.
Valved Technology
The valve is the whole feature: open for the unrestricted path and full sound, closed for the muffled path and a quiet cabin. If your car has to be two cars, this is how.
Design and Fitment
A cat-back uses larger-diameter piping and a high-flow muffler for a more noticeable change in sound and flow. An axle-back changes the note with minimal performance effect. Both are only worth buying in the version built for your exact car — see fitment below.
Exhaust Tips
Tips are the visible part of the system. Shapes run single or dual; finishes include polished stainless, burnt titanium, black chrome, and carbon fiber. Tips do not affect performance. Pick the style that fits the car.
How to Choose
Define your sound first. Decide whether you want a deep roar or a refined sporty tone, then listen to sound clips of systems on your specific model. A valved system removes the guesswork if you want both ends of the range.
Double-check fitment. An exhaust built for a VA-chassis WRX will not fit a VB. A Forester system is not a BRZ system. Confirm year, model, and trim before you buy. Buying performance parts designed for your specific vehicle takes the guesswork out and gets you a bolt-on install.
Power vs. noise. Larger piping and freer mufflers generally mean more of both. A turbo-back has the highest performance potential and the most sound. A quality cat-back is the balance point for a daily-driven car.
Noise rules vary by state and city. Check your local rules before you buy.
What It Costs
Under $800. Axle-back systems and some budget cat-back options. Mostly stainless, a modest performance bump, and a real change in sound. A sound first mod.
$800 to $1,500. The sweet spot. High-quality stainless cat-back systems with better flow, a deep note that stays manageable on a daily drive, and build quality that lasts. Most of the popular WRX and STI systems sit in this range.
Over $1,500. Premium territory, usually titanium. The draw is weight — systems with 3-inch piping and total weights around 15 pounds — plus a distinct, exotic note. Track builds and serious enthusiasts pay for it.
Installing It: Pro vs. DIY
A professional install guarantees the job: proper tools, and experience with the rusted bolts and fitment fights that show up under a used car. The result is secure and leak-free.
DIY is realistic for a bolt-on system. You need a socket set, wrenches, penetrating oil for stubborn bolts, and a jack with sturdy jack stands. Some systems require cutting the factory pipe — measure twice, cut once. Budget anywhere from two hours to a full afternoon, depending on experience and rust.
Do you need a tune? An axle-back or a cat-back alone does not require a tune; the car's computer adapts to the modest change in airflow. A turbo-back or any change that replaces the downpipe makes a professional tune mandatory. Crawford does not sell tuning. Have the tune done by a platform specialist.
Maintenance
Clean the tips, muffler, and piping every time you wash the car, with standard car-wash soap and a soft brush or mitt. Road salt, grime, and moisture are what corrode metal; washing them off is the defense. While you are there, inspect: rubber hangers for cracks or stretching, bolts and clamps for tightness. A loose connection rattles first and leaks later.
Every few months, get under the car — safely, on jack stands — and look closer. Check welds for cracks, look for dents from road debris and deep rust. Use your ears too: a note that suddenly gets louder or raspier, a new hiss or rattle, or black soot around a connection all point to a leak. Fix small problems before they become big ones.
Care follows the material. Stainless can blue from heat; a dedicated metal or chrome polish on a microfiber cloth restores the shine. Titanium is softer and scratches more easily, so skip abrasive cleaners and use gentle soap and water. Many owners keep titanium's blue and purple heat coloring as-is. Carbon fiber and black chrome tips get gentle automotive soap only.
Frequently Asked Questions
Will a performance exhaust make my car too loud for daily driving? Not necessarily. Volume and tone depend on the system. An axle-back is a noticeable but manageable step up from stock. A cat-back is more aggressive, and many are engineered to minimize drone at cruising speeds. A valved exhaust settles it entirely — quiet mode for the neighborhood, loud mode on demand.
Do I really need a tune after installing a new exhaust? It depends on the system. For an axle-back and most cat-backs, no — the computer adapts. For a turbo-back that replaces the downpipe, a tune is absolutely mandatory, to keep the engine running safely and to make use of the airflow.
What is the quickest way to understand cat-back vs. axle-back? An axle-back is primarily a sound upgrade — muffler and tips only. A cat-back is a sound and flow upgrade — everything from the catalytic converter back, with a fuller, more aggressive note.
Besides power and sound, are there other benefits? Two. Reduced backpressure improves throttle response. And aftermarket systems in T304 stainless or titanium weigh less than the heavy factory system, which contributes to better handling and acceleration.