Crawford Baja off-road parts on a Subaru

How to Choose the Right Forester Lift Kit

A lift kit is the first real step in turning a Forester from a daily driver into a vehicle that can handle rough ground. It raises the suspension, adds ground clearance, and makes room for larger tires. This guide covers the types of kits, what they cost, how high to go, and what the lift changes about the way the car drives and wears.

What Is a Subaru Forester Lift Kit?

A lift kit is a set of parts that raises your Forester's suspension and increases its height. The point is ground clearance — the space between the ground and the undercarriage. Clearance is what gets you over rocks, ruts, and trail obstacles without dragging the underside.

The lift also creates room for larger, more capable tires, which add traction and a little more clearance of their own. The two changes work together. A lift without tires is half the job.

Not all kits are the same. They range from simple spacers that add height and nothing else to complete suspension systems that change how the suspension works. Which one is right depends on what you plan to do with the car.

Spacer Lifts vs. Suspension Lifts

Spacer lifts are the basic, affordable option. A metal or polyurethane spacer sits on top of the factory strut and pushes the body higher. The suspension itself does not change — no added travel, no improvement in off-road performance. You get the look and the clearance, and that is all.

Suspension lifts replace factory components with parts built for the job: longer springs, new struts, and hardware that corrects suspension geometry. The lift is real, travel improves, and the car handles rough ground better and lasts longer doing it. This is the route for serious trail and overland use.

What Are the Perks of Lifting Your Forester?

  • Ground clearance. The underbody sits higher, so rocks and uneven ground are less likely to damage it.
  • Better approach and departure angles. You can climb onto and off of steeper obstacles without scraping the bumpers.
  • Room for larger tires. Bigger tires grip better in mud, sand, and snow, and add clearance of their own.

Budget for the whole project, not just the kit. Tires and a professional alignment are part of the job, not extras.

A Common Myth About Lifting

One claim you will hear: lifting a Forester ruins its on-road handling. A cheap spacer lift can ride stiff, because it adds height without addressing geometry. A well-engineered system accounts for the changed angles, keeps wear on ball joints and control arms in check, and stays stable and predictable on the road. The kit quality decides which outcome you get.

The Crawford Approach

The sweet spot for a Forester is 2 to 2.5 inches. That height gives a real gain in ground clearance and room for larger tires without compromising the car's core suspension geometry and on-road stability.

We advise against extreme lifts. A 6-inch lift asks more than the Forester's unibody design is built to take. Height past the moderate range stresses CV joints, control arms, and the structure itself.

A proper lift is a system, not a stack of spacers. Crawford's Forester 2-inch lift kits are built around that idea, and the Subframe Drop Kit corrects what the lift changes: dropping the subframe brings CV axle angles back toward their factory working range, which protects the axles and keeps alignment where it belongs. For the factory-lifted trim, see the Crawford Forester Wilderness lift and the Wilderness lift kit guide.

How Much Does a Forester Lift Kit Cost?

The total depends on the type of kit, who installs it, and what else the car needs at the same time. Plan for the complete project: kit, tires, installation, and alignment.

Spacer Lifts

Spacer lifts typically cost between $100 and $300. They are the budget route to height and tire clearance. Understand the limit: a spacer does not change suspension geometry or add travel, so it does not improve off-road performance the way a suspension lift does.

Full Suspension Lifts

Full suspension systems generally run from $500 to over $2,000. The kit includes springs, struts, and the hardware to raise the car and keep its geometry right. The money buys articulation over obstacles, a better ride on rough ground, and components built to hold up under that use.

Extra Costs: Installation and Parts

The price on the box is rarely the final cost. Some kits need supporting parts to work correctly — longer brake lines or upgraded control arms, for example. A lift also changes suspension geometry, and geometry changes accelerate wear on ball joints, CV axles, and control arms. A quality kit is designed to minimize that wear, but set money aside for maintenance and replacement parts down the line. Planning for these costs up front avoids surprises.

How High Should You Go?

Higher is not automatically better. The right height balances trail capability against the reliable, safe on-road handling you need every day. Define your goal first: clearing rougher trails on weekend camping trips takes less lift than a dedicated overland build.

Ground Clearance vs. Geometry

For the Forester, 2 to 2.5 inches is the range that works. You gain clearance and tire room without drastically altering suspension geometry. Lifting changes the working angles of the CV axles and control arms; a moderate lift keeps those angles manageable and prevents premature wear.

Push past that range and the problems start: binding CV joints, poor alignment, and reduced reliability. A well-engineered 2-inch lift works with the Forester's factory suspension instead of fighting it. More detail in our 2-inch lift kit guide.

Planning for Bigger Tires

Fitting larger tires is one of the main reasons to lift. Bigger tires add traction on dirt and gravel and raise the car a little further. A 2-inch lift typically allows a larger all-terrain tire without significant rubbing and without trimming fenders.

Tire Size Recommendations

For a 2 to 2.5-inch lift, an all-terrain tire is the effective upgrade — on-road comfort with real off-road grip. A common size for a lifted Forester is 235/65R17: a larger footprint and better traction without major modifications.

Test-Fitting Matters

Test-fit before you buy. Tire dimensions vary slightly between manufacturers at the same listed size, and an aggressive shoulder tread can rub where a milder one clears. Check clearance at full steering lock and under suspension compression. A professional installer can confirm the fit for your specific setup.

How a Lift Kit Changes Your Forester's Performance

A lift changes the car's geometry and physics, on the trail and on the pavement. You gain capability off-road and give up some of the sharp, car-like handling on-road. A quality kit and a correct installation minimize the downside. They do not erase it.

Off-Road

This is what the lift is for. The extra clearance gets you over rocks, ruts, and obstacles that stop a stock vehicle, and the larger tires the lift makes room for do the gripping — on dirt, sand, and mud, tires are what move the car. Clearance plus traction is the whole gain.

On-Road Handling

Raising the center of gravity adds body roll in corners. The car feels less planted in quick maneuvers and at highway speed. That is a normal consequence of the changed geometry, not a defect — but it does ask for an adjustment: take turns a bit slower and make lane changes more gradually.

Tire Choice and Ride Quality

The lift makes room; the tires decide the daily driving experience. Tire type — all-season, all-terrain, or mud-terrain — drives handling, road noise, and fuel mileage more than the lift itself. All-terrain tires are the balance point for most builds: real off-road grip without much highway penalty. Mud-terrain tires grip harder in bad conditions and cost you road noise and fuel economy. Choose for how you actually use the car.

How to Maintain Your Lifted Forester

A lifted Forester puts additional stress on suspension and drivetrain components. CV joints, ball joints, and bushings can wear faster than they would at stock height. Good parts and correct geometry slow that down; they do not stop it. Inspect accordingly.

A Professional Alignment Is Not Optional

After installation, get a professional four-wheel alignment immediately. Installing a lift changes camber, caster, and toe. Without an alignment, the car can pull to one side, handle unpredictably, and wear new tires out fast and unevenly. The alignment brings the angles back as close to factory specification as possible. It is part of the installation, not a follow-up.

Post-Installation Safety Checks

Two checks close out a correct install. Both exist because the car's systems were set up for its factory height.

Headlight adjustment. Lifting raises the nose, so the headlight beams aim higher than they should. That cuts your own view of the road and shines into oncoming drivers' eyes. Aim the headlights after the lift.

ADAS recalibration. Newer Foresters carry driver-assist systems — Subaru's EyeSight among them — with cameras and sensors calibrated to stock height. Pre-collision braking, adaptive cruise control, and lane-keep assist all read the road from that height. A lift changes their viewing angle, which can produce inaccurate readings or malfunctions. Have the systems recalibrated by a qualified technician or dealership after the lift.

How to Choose the Right Kit

Define Your Goals and Your Budget

Be honest about the use. Mostly road driving, with the lifted look and clearance for larger tires on occasional dirt roads — a quality spacer lift may be enough. Regular hard off-road use calls for a full suspension lift: heavy-duty parts, better articulation, and durability a spacer cannot provide. Decide the use first, then set the budget.

What to Look For in a Quality Kit

  • Corrosion-resistant materials that stand up to the elements.
  • Engineered components — real springs and struts — not spacers alone.
  • The supporting pieces included or accounted for: subframe spacers to correct geometry, larger tires, and the alignment after install.

A complete system from one source means the parts were designed to work together.

DIY vs. Professional Installation

Installing a lift is a major suspension job. Without the right tools — spring compressors and a vehicle lift among them — and the experience, it is easy to get wrong, and wrong means poor handling, premature wear on other components, and an unsafe car. A professional installer has the equipment and has done the job before. Expect to pay between $500 and $1,000 for labor. Treat it as part of the cost of the lift, not an optional upgrade.

Estimated Installation Times

A professional installation generally takes four to six hours, depending on the shop's Subaru experience and the kit. A straightforward spacer lift runs about four hours, which is a useful baseline for estimating labor. Doing it yourself for the first time, plan on a full day or a weekend. The savings are real, but only take the job on if you have the time, the tools, and the patience to finish it safely. The install process for the Wilderness kit is covered in the installation guide.

Related Articles

Frequently Asked Questions

Is a 2-inch lift really enough for off-roading? Yes. The 2 to 2.5-inch range is the sweet spot for a Forester: a significant increase in ground clearance and room for larger, more capable tires, without over-stressing the unibody and suspension components. It is the balance point between real trail capability and safe, reliable everyday handling.

What's the first thing I should do after my lift kit is installed? Take the Forester straight to a reputable shop for a professional four-wheel alignment. It is not optional. The install changes the suspension geometry, and without an immediate alignment you get poor handling, unpredictable steering, and rapid, uneven tire wear.

Do I need to buy bigger tires at the same time as the lift kit? Not on the same day, but include them in the budget and the plan. You can drive on stock tires after the lift. You just will not get the full benefit — the clearance and traction gains are realized when the lift is paired with larger, more aggressive all-terrain tires.

How will a lift kit affect my Forester's gas mileage? Expect a decrease. A lifted vehicle is less aerodynamic, and the larger, heavier tires take more energy to turn. The exact drop varies with the lift, the tires, and your driving. It is the trade for the off-road capability.

Related reading: Is a Subframe Drop Lift Right for Your Subaru?.

Back to blog