Subaru Crosstrek Skid Plate: A Complete Guide
Share
Your Crosstrek's ground clearance looks fine on a spec sheet. Underneath, the oil pan, transmission pan, and rear differential sit exposed, and the factory splash shields are plastic. One rock on a forest road can end a trip and start a repair bill. A skid plate is a metal plate that bolts under the car and takes the hit instead.
Crawford builds skid plates for both Crosstrek generations — 2018–2023 and 2024+ — covering the three components that actually need armor.
The three plates
Motor skid plate — $299.99. This is the first plate to buy. It covers the engine and front undercarriage, fits both the 2.0L and 2.5L, and has an oil drain hole, so oil changes don't require removing it. The rear edge is upturned, which eliminates hang-ups when you reverse off an obstacle.
Transmission skid plate — $299.99. Covers the transmission and its oil pan. It mounts directly to the existing subframe for rigidity, fits flush so it doesn't snag when reversing, and installs on its own — you don't need the motor plate first.
Rear differential skid plate — $149.99. Covers the rear differential and still allows access to the diff service ports, so fluid changes stay simple. The design comes from the Subaru of America Crosstrek Desert Racer program.
- Differential skid plate (Crosstrek / Outback / Forester)
- 2024+ Crosstrek rear differential skid plate
Why 3/16" aluminum
Every Crawford plate is 3/16" laser-cut aluminum with a polished finish. Aluminum at that thickness takes trail impacts without the weight penalty of steel, and it doesn't rust. The plates mount to the existing subframe, and the motor plate is shaped to work with airflow — it does not reduce radiator or cooling system efficiency.
Buy the kit instead
Bought separately, the three plates total $749.97. The Baja Skid Kit is $674.99 — all three plates, one box:
If you also want rock sliders, Baja Protection is $1,439.99 — the three skid plates plus a set of rock sliders ($1,649.96 bought separately). The full armor and lift program for the Crosstrek is in our off-road collection.
FAQ
How thick should a Crosstrek skid plate be? 3/16" aluminum is the working standard for a car this weight. Thinner plates flex and tear at the mounting points; thicker steel adds weight the Crosstrek doesn't need to carry.
Do I have to remove the plate to change the oil? No. The Crawford motor skid plate has an oil drain hole, and the differential plate leaves the diff service ports accessible.
Which plate should I buy first? The motor plate. The oil pan is the lowest, most exposed, and most expensive failure under the car. Add the transmission and differential plates when the trails get rougher — or start with the Baja Skid Kit and cover all three at once.
Does a skid plate affect cooling? Crawford's motor plate is designed to preserve airflow and does not reduce radiator or cooling system efficiency.
Do the plates fit my generation? There are separate plates for 2018–2023 and 2024+ Crosstreks. Order for your generation; the mounting points differ.