Upgrade Your Light Wiring Harness with Crawford Performance Circuit Board

• Circuit Board used on the Crawford Off-Road Subaru Crosstrek Build
• Powder coated steel plate designed to hold all fuses and relays for the Crawford light wiring harnesses
• Mounts off of battery brace for easy installation of harnesses
• Bracket provides a clean finish and minimizes wire clusters for easier maintenance and installation of components

Our integrated lighting circuit harness fits seamlessly into the engine bay to provide a secure point to mount the Crawford light wiring harnesses. Easy installation and access mean less trouble installing wires and a cleaner finished product when the job is done!

 Included Components:

• One Crawford Performance Circuit Board for Light Wiring Harness

If you are looking to improve the performance of your vehicle's lighting system, then Crawford Performance Circuit Board for Light Wiring Harnesses is what you need. This circuit board is designed to enhance the efficiency of your light wiring system by reducing the voltage drop and increasing the current flow.

Made from high-quality materials, Crawford Performance Circuit Board is durable and can withstand the rigors of daily use. The board is designed to be easy to install and comes with all the necessary components to ensure a hassle-free installation process.

One of the significant advantages of using Crawford Performance Circuit Board is its ability to reduce the electrical resistance of your light wiring system. By reducing the resistance, the current flow increases, resulting in brighter lights with better illumination. This means you can see better in low light conditions and improve your overall driving safety.

Crawford Performance Intake Manifold Spacers / Billet Power Blocks (BPB) for 2017+ Subaru Impreza 2.0i

• Adds 15 HP / 22 TQ - No Tune Required

• Improves Acceleration

• Decreases Delay between Shifts with AT

• Increases the Volumetric Efficiency of your Intake Manifold

• Maximizes the Potential of Aftermarket Intakes

• Installs in an three hours or less

• raises intake manifold by 1-13/16" inches
  

• Stealth Black now available!

Naturally Aspirated (N/A) vehicles are starving for air without a turbo. Sure, an aftermarket Intake / Cold-Air Intake will bring more air in, but without a bigger volume in your intake manifold to receive the extra air, the air flow essentially gets choked before it has a chance to enter the engine. 
The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. This increases the volumetric efficiency of your manifold, which provides optimum airflow so that your engine receives as much air as your intake (OEM or aftermarket) can throw at it. 
Tested on and off our Dynapack Chassis Dyno, we stacked plates up then back down until we found the sweet spot that makes your FB20 engine scream (in a good way)! 
Made from CNC'd billet 6061 Aluminum and anodized red, these spacers look incredible under the hood. The kit includes the 2 spacers, 6 longer mounting bolts, 4 Viton 75 o-ring seals, a stainless steel extended EGR tube, as well as an extended PCV hose. 
The install can be completed within 3 hours, and is rated a 6 out of 10 on install difficulty. 

We recommend running mid-grade or premium fuel for the best results. 

The BPB's are compatible with OEM or aftermarket intakes, tunes, and higher octane fuels.

We recommend running mid-grade or premium fuel for the best results. 

The BPB's are compatible with OEM or aftermarket intakes, tunes, and fuel. 

Note: We only recommend this upgrade on naturally aspirated setups. 

Note: For Off-Road Use Only

If your vehicle has high mileage (~100,000 miles), consider purchasing set of new Intake Manifold Gaskets with your order. If you reassemble your vehicle after installing the BPB's and receive CEL Code P050A, an air leak from your gaskets is most likely the cause. 

Install Instructions

Written PDF

What is the Crawford Air Oil Separator Baja?

• Not a Catch Can - Closed Loop and Maintenance Free

• Consume Less Oil

• Extend the Life of your Engine

• Reduce Detonation and Risk of Engine / Ringland Failure

• Reduce Fuel Dilution and Subsequent Power Loss

• Custom Colors available

• Default Color is Satin Black

New Baja Edition Features:

• Labyrinth within Baffled Chambers increase efficiency

• Does not delete Smog Component - Utilizes OEM PCV System

• 2 Lines = minimum complexity

• Design tested on the Subaru-Backed Crosstrek Desert Racer for thousands of race miles

Oil pooling in your intake? Stop the oil from ever getting there with the Crawford Air Oil Separator.

The Crawford Performance Air Oil Separator (AOS) is the original solution to Subaru's notorious oiling system issues. Although the technology was pre-existing with other vehicle brands such as Porsche, Crawford Performance is the inventor of the first system specifically for Subaru. No other AOS on the market employs the same technology.

Want to know more about how an Air/Oil Separator works and why you need one? 

Click here to check out our FAQ blog on the technology inside. 
There you can also find a full fitment list for all current versions and kits.

Note: more fitment options are currently in R&D. Is your car or application unavailable? Click here to check our V2 Kits, which have the widest range of fitments. 

Install Instructions:
Please note! This kit can be installed with or without Power Blocks.
Default spacers are without Power Blocks!
Written PDF

The Crawford Air Oil Separator Baja is a high-quality performance intake component that's designed to fit 2017+ Impreza 2.0 models. It is designed to help keep your engine's internal parts clean and prevent oil from contaminating your intake air.

This air oil separator is made from durable materials and engineered to separate oil mist from the air before it reaches your intake system. As a result, your engine will perform better and last longer, as it won't be affected by harmful contaminants.

With the Crawford Air Oil Separator, you can eliminate the need for frequent oil changes and enjoy a cleaner, more efficient engine. It's an excellent upgrade for anyone looking to improve their Impreza's performance and reliability.

Upgrade Your Subaru with Crawford Performance 2" Lift Kit

FMVSS 126 Compliant!

• Also fits the 2018+ Subaru Crosstrek Hybrid!

• Provides 2" front lift and 1.5" rear lift for a perfect leveled look 

• Billet CNC Aluminum coilover spacer built for strength and corrosion resistance

• Sway bar link extensions maintain factory sway bar positioning

• Maintains OEM ABS sensors and brake line mounts

• This suspension lift kit allows for larger tires 

• Easy, bolt on installation 

The Crawford Performance 2" Lift kit is inspired by theSubaru of America Crosstrek Desert Racer and is made to take you places you wouldn't otherwise been able to go. Enhance your off-roading experience and worry less about high-centering or damaging your undercarriage with the best Subaru Crosstrek lift kit!

Included Lift Kit Components:

• Two 2" aluminum strut spacers (front)
  
• Two 1.5" aluminum strut spacers (rear)
• Six long strut extensions (front) - M10 x 1.25
• Four short strut extensions (rear) - M10 x 1.25
• All necessary hardware

Note: Re-alignment will be required after installation

Install Instructions:

Written PDF

Check out our Full Crosstrek Build Here:

https://crawfordperformance.com/pages/cpi-built-crosstrek

If you're looking to take your 2017+ Subaru Impreza to the next level, look no further than the Crawford Performance 2" Lift Kit. This lift kit is designed to enhance your off-road capabilities and give your vehicle a more aggressive look. With this lift kit, you'll be able to explore new terrain and tackle tough obstacles with ease.

The Crawford Performance 2" Lift Kit is specifically designed for the 2017+ Subaru Impreza, ensuring a perfect fit and optimal performance. This lift kit provides a two-inch lift, which allows for larger tires and more ground clearance. With increased ground clearance, you'll be able to take on more challenging terrain and avoid damage to your vehicle.

In addition to improved off-road capabilities, the Crawford Performance 2" Lift Kit also enhances the overall look of your Subaru Impreza. The lift kit provides a more aggressive stance and makes your vehicle stand out from the crowd. Plus, the increased ground clearance makes your vehicle more visible on the road, improving safety and visibility for you and other drivers.

Overall, the Crawford Performance 2" Lift Kit is a must-have upgrade for any 2017+ Subaru Impreza owner looking to enhance their off-road capabilities and make their vehicle stand out from the crowd. With its easy installation and durable construction, this lift kit is a smart investment for any adventure enthusiast.

Unleash the Power of Your Subaru Impreza Wagon

Crawford Performance Axle Back Exhaust for 2017+ Subaru Impreza Wagon 

• 2 Options: Muffler Delete & Muffler Replacement

• Not for Sedan Models

• Bolts directly on to Stock Mid-Pipe (2.0")

• Perfect for those wanting to keep all Cats (Catalytic Converters) in place for Smog Legality

• Easy to swap with Stock Muffler / Exhaust

• Inspired by the Original Gymkhana One Exhaust

The Crawford Performance Subaru Impreza Axle Back Exhaust is a product that was inspired by the Crosstrek Desert Racer and our original Subaru Gymkhana videos. We've taken that inspiration and applied it to the Impreza to enhance their signature boxer engine sound like we have with many other Subaru models. The shrunk down megaphone design creates a distinct and hearty growl that imitates our race cars and invokes the spirit of speed expected from Crawford. We also gave you two options; a muffled version and a straight pipe version

Included Components:

• 1 Crawford Performance Impreza Exhaust
• Reuse your OEM hardware

Note: System bolts directly on to stock mid-pipe and this system has been tested to generate the same power levels as a exhaust free vehicle (no mid pipe, no axle back).

Specifications

Body measures: 2"

Tip measures: 9.75"

Tip diameter: 4" at widest (3.5" at outlet)

*Resonator: 8"

*Resonator only included in "with resonator" variant

Resonated 

Un-Resonated

Upgrade your 2017+ Subaru Impreza Wagon with the Crawford Axle-Back Exhaust for a noticeable increase in performance. This exhaust system is designed to provide a boost in horsepower and torque, giving you a more responsive and powerful driving experience.

Made from high-quality materials, the Crawford Axle-Back Exhaust is built to last. The stainless steel construction ensures durability and long-lasting performance, while the precision-engineered design ensures a perfect fit and easy installation. With a unique exhaust note, the Crawford Axle-Back Exhaust is sure to turn heads and give your vehicle a more aggressive sound on the road.

Not only does the Crawford Axle-Back Exhaust improve performance, but it also enhances the overall look of your Subaru Impreza Wagon. With its sleek and modern design, this exhaust system adds a touch of sophistication to your vehicle. Upgrade your Subaru Impreza Wagon today with the Crawford Axle-Back Exhaust and experience the ultimate driving experience.

Make Your Crosstrek or Forester Stand Out

Windshield Banner Designed for 2018+ Subaru Crosstrek and 2019+ Subaru Forester. *Please specify in Notes which vehicle it is for.*

Matte Black with White Crawford and Red Stripes. Super easy to install. Air Release Car Vinyl. Simply lay down and trim the banner to conform to your window or windshield.

Looking for a way to add some personality to your 18+ Crosstrek or 19+ Forester? Look no further than this custom windshield banner from our Accessories collection! Made from high-quality vinyl, this banner is designed to withstand the elements and add some serious style to your ride.

With its bold, easy-to-read font and sleek, modern design, this windshield banner is sure to turn heads on the road. Whether you're driving in the city or heading out on an adventure, this banner is the perfect way to show off your love for your Crosstrek or Forester.

Attract attention to your Crosstrek or Forester and make it unmistakably yours. Each banner is custom-made to fit your windshield perfectly, ensuring a seamless look and hassle-free installation. Simply peel and stick for a bold new look in minutes!

So why wait? Elevate your ride and add some serious style to your 18+ Crosstrek or 19+ Forester with this custom windshield banner. Purchase yours today and enjoy driving in style!

Before using a full synthetic, it's a good idea to start your new engine off on an oil that will be more forgiving during the break-in stage. Starting off as a specific motorcycle oil, we have discovered by working directly with MOTUL on our racing program that is is also great for breaking-in passenger vehicle engines. 

Technosynthese® 4-Stroke lubricant – Ester technology - Improved shear resistance. Smooth shifting. Meets JASO MA2 specifications for optimal wet clutch performance. Suitable for catalytic converters.

Recommended for break-in of a new motor, minimum 1,000 miles...ideally 3,000 miles.

MOTUL Mfg. Part #: 104066

https://s3-eu-west-1.amazonaws.com/motul-production2/images/product_descriptions/technical_data_sheets/61284/5100_4T_10W-40__28GB_29.pdf?1492017497

Experience Ultimate Performance with Crawford Performance Subaru Rally Livery

Included Components

• Vehicle sticker "wrap" of classic six star livery
• Six star and swoosh sticker for both side of vehicle
• *Please note is has a Crawford Performance Logo in Swoosh

Get ready to elevate your ride with the Crawford Performance Subaru Rally Livery. Expertly designed and crafted, this aftermarket performance accessory not only enhances the look of your Subaru but also significantly boosts its performance on the road, and more impressively, on the rally tracks.

With this rally livery, you can flaunt your allegiance to the Crawford Performance brand, a trusted name in the aftermarket performance industry. Built to last, the Crawford Performance Subaru Rally Livery is made from high-grade materials ensuring a seamless and long-lasting application on your vehicle. The vibrant and eye-catchy graphics are sure to turn heads wherever you go.

Easy installation allows for a quick and hassle-free transformation of your Subaru. Go from average to astonishing in no time with Crawford Performance Subaru Rally Livery. The noticeable increase in performance is another amazing plus. Experience the thrill of rally driving with the confidence that your vehicle looks the part and performs even better.

In summary, the Crawford Performance Subaru Rally Livery is not just about aesthetics. It's about affirming your commitment to quality, performance, and style. Don't settle for anything less. Equip your Subaru with Crawford Performance Subaru Rally Livery and stand out from the crowd while cruising on the highway or speeding on the rally tracks.

Crawford Performance 90 Degree LED Light Pods

• LED light pods used on theCrawford Off-Road Subaru Crosstrek Build
• 90 Degree LED's shine out the front and sides of the pod giving you full vision while overlanding. 
• Compatible with our Hood and Mirror Brackets for various Subaru vehicles. 
• Give your vehicle a rally / off-road style
• Sold as a pair of 2 pods

Included Components:

• Two 90 degree Crawford LED light pods 
• Light pod brackets and hardware

Crawford Performance Hood Light Pod Brackets for 2017+ Subaru Impreza: 

• Will accept most light pod styles

• Light mount brackets are powder-coated for durability and corrosion resistance 

• Simple installation and does not require hood to be removed

• Adds an aggressive rally style look while improving nighttime and fog visibility

• Sold as pair

• Will limit hood movement (Can still utilize 1st hood prop point) 

The Crawford Performance Hood Light Pod Brackets are inspired by the Subaru of America Crosstrek Desert Racer, with the simple goal of lighting up any path you choose to conquer in your Impreza. Our hood light brackets also known as a ditch light can be coupled with with your choice of LED cube pod light or with our 90 degree LED light pods. Our pods allow for full vision from side to side of the vehicle, providing security and assurance that nothing will take you by surprise during your night time off-roading.    

Included Components:

• Two powder-coated hood mounting brackets 
• All necessary mounting hardware

Note: Light pods purchased separately here: Light Pods or purchase the full kit here: Hood Light Pod Kit

Installation Instructions:

Written Instructions

If you're an adventurous driver who likes to take their Subaru Impreza off-road, the Crawford Performance Mirror Light Pod Brackets are an essential addition to your car. These brackets enable you to install a pair of light pods on the mirrors of your car, which will significantly improve your visibility during nighttime driving. In this article, we'll discuss more about these brackets and why you should consider buying them for your Impreza.

Made specifically for the 2017-2023 Subaru Impreza, the Crawford Performance Mirror Light Pod Brackets are made from durable materials that guarantee longevity and high performance. They come in a black coating that seamlessly blends with your car's exterior, giving it a sleek, sporty look. Despite their sturdy build, these brackets are lightweight and designed to be easily installed without any intricate tools or modifications.

One of the main benefits of the Crawford Performance Mirror Light Pod Brackets is the added safety they bring to your night drives. With the light pods installed, you can see the road ahead much clearer, allowing you to spot obstacles and potential hazards ahead of time. Whether you're driving on poorly lit roads, mountains, or forest trails, these brackets will provide you with the visibility you need to navigate through these terrains.

In conclusion, upgrading your 2017-2023 Subaru Impreza with Crawford Performance Mirror Light Pod Brackets is a smart decision for anyone looking to have safer night drives and stand out from the crowd. With these brackets, you get a stylish addition to your car that won't compromise its performance. Order now to experience the quality and functionality of these exceptional car accessories!

Upgrade Your Subaru Impreza with Crawford Performance Mirror Light Pod Brackets

• Sold as a pair

• Light mount brackets are powder-coated for durability and corrosion resistance 

• Maintains OEM look through integrated vehicle mounting

• Simple installation takes 15 minutes

• Adds an aggressive rally style look while improving nighttime and fog visibility

The Crawford Performance Mirror Light Pod Brackets are inspired by the Subaru of America Crosstrek Desert Racer, with the simple goal of lighting up any path you choose to conquer in your Impreza. Our mirror light brackets can be coupled with with your choice of LED cube pod light or with our 90 degree LED light pods. Our pods allow for full vision from side to side of the vehicle, providing security and assurance that nothing will take you by surprise during your night time off-roading.    

Included Components:

• Two powder-coated mirror mounting brackets 
• All necessary mounting hardware

Note: Light pods purchased separately here: Light Pods or purchase the full kit here: Mirror Light Pod Kit

Installation Instructions:

Written Instruction

• Anodized Red or Black Aluminum Spacers
• Made to Re-Align the Rear Sub-Frame Geometry After Installing a Strut Spacer Lift Kit
• Returns CV Axles to OEM positioning for Better Wear
• Fixes Rear Camber and Toe Alignment Issues seen with Spacer Lift Kits
• Helps Re-Center the Rear Tires in the Wheel Well
• Includes Brake Line Extension Brackets
• Includes Extended Exhaust Hangers
• All Necessary Hardware Included

The Crawford Performance Sub-Frame Drop Kit is inspired by the Subaru of America Crosstrek Desert Racer and made to re-align the rear sub-frame geometry after installing a strut spacer lift kit. Our Sub-Frame Drop Spacer Kit will allow for rear camber and toe correction, level out your CV angles, and also center the rear tire in the wheel well when lifting your car beyond 1.5 inches. The lifted look is maintained, and the vehicle stability will be dramatically improved.

Included Lift Kit Components:

• Four Sub-Frame Drop Spacers
• Two Torsion Bar Spacers
• Two Sub-Frame Support Stand-Offs
  
• Two Rear Brake Line Extensions
  
• All necessary hardware

Note: Re-alignment will be required after installation

Install Instructions:

Written PDF 

Illuminate Your Path with Crawford Performance 2017-2023 Subaru Impreza Mirror Light Pod Kit

Crawford Performance Mirror Light Pod Kit for 2017+ Subaru Impreza

• 90 degree LED cube pods included (comes as pair) 
  

• Light mount brackets are included and are powder-coated for durability and corrosion resistance 
  

• Maintains OEM look through integrated vehicle mounting

• Includes pre-measured wiring harness

• Adds an aggressive rally style look while improving nighttime and fog visibility

• Call in for Custom Powder Coat Options

Note: The Crawford Circuit Board Bracket is a recommended option to ensure the wiring fits cleanly and enough wire length is usable  

The Crawford Performance Mirror Light Pod Kit is inspired by the Subaru of America Crosstrek Desert Racer, with the simple goal of lighting up any path you choose to conquer in your Impreza. Our mirror light brackets coupled with our 90 degree LED light pods allow for full vision from side to side of the vehicle. Providing security and assurance that nothing will take you by surprise during your night time off-roading.     

Included Mirror Light Kit Components:

• Two powder-coated mirror mounting brackets 
  
• Two 90 degree LED Light pods
• Wiring harness and switch
• All necessary mounting hardware

Light Specifications:

• 90º pods are 45w each resulting in 3.75a @ 12v
• 3600 lumens from each pod cube

Installation Instructions:

Written PDF

Driving in low light conditions can be a challenging and dangerous experience for many drivers. It's no secret that when you have good visibility on the road, you can make split-second decisions that may save a life. Crawford Performance understands the importance of visibility on the road and introduces the Crawford Performance 2017-2023 Subaru Impreza Mirror Light Pod Kit.

This comprehensive kit is designed to enhance the safety and performance of your Subaru Impreza. The kit includes durable and long-lasting mirror light pods that are easy to install and offer excellent visibility in low-light conditions. This kit is a great addition to any Subaru Impreza model from 2017 to 2023.

When driving at night or during low-light conditions, the visibility of the road becomes severely limited, and this can be dangerous for the driver and other road users. The Crawford Performance 2017-2023 Subaru Impreza Mirror Light Pod Kit offers excellent visibility on the road, illuminating your path and keeping you safe. The mirror light pods are designed to be mounted easily on your Subaru Impreza's side mirrors and offer excellent illumination in low-light conditions.

The Crawford Performance 2017-2023 Subaru Impreza Mirror Light Pod Kit features high-quality materials to ensure that the mirror light pods remain durable and long-lasting. The kit includes everything you need to get the job done, and installation is a breeze. The mirror light pods come with the necessary brackets and wiring harness, making installation a breeze.

In conclusion, if you're looking to upgrade your Subaru Impreza's lighting performance, you can't go wrong with the Crawford Performance 2017-2023 Subaru Impreza Mirror Light Pod Kit. This comprehensive kit is designed with your safety and visibility needs in mind, and it's a great investment for any Subaru Impreza owner. Upgrade your vehicle today and enjoy the improved visibility on the road.

Crawford Performance Hood Light Pod Kit for 2017+ Subaru Impreza

• 90 degree LED cube pods included (comes as pair) 

• Light mount brackets are included and are powder-coated for durability and corrosion resistance 

• Maintains OEM look through integrated vehicle mounting

• Includes pre-measured wiring harness

• Adds an aggressive rally style look while improving nighttime and fog visibility

• Call in for Custom Powder Coat Options

• Will limit hood movement (Can still utilize 1st hood prop point) 

Note: The Crawford Circuit Board is highly recommended for this kit. Giving you a clean install and mounting location for your switch. 

The Crawford Performance Hood Light / Ditch Light Pod Kit is inspired by the Subaru of America Crosstrek Desert Racer, with the simple goal of lighting up any path you choose to conquer in your Impreza. Our hood light brackets coupled with our 90 degree LED light pods allow for full vision from side to side of the vehicle. Providing security and assurance that nothing will take you by surprise during your night time off-roading.    

Included Hood / Ditch Light Kit Components:

• Two powder-coated hood mounting brackets 
  
• Two 90 degree LED Light pods
• Wiring harness and switch
• All necessary mounting hardware

Light Specifications:

• 90º pods are 45w each resulting in 3.75a @ 12v
• 3600 lumens from each pod cube

Installation Instructions:

Written Instructions 

Why You Need Crawford Performance 2017+ Subaru Impreza Transmission Skid Plate

Crawford Performance Transmission Skid Plate for 2017+ Subaru Impreza

• Made with 3/16"" laser cut aluminum
• Polished finish
• Does not require our front skid plate for installation
• Mounts directly to existing sub frame for maximum rigidity 
• Offers full protection for your transmission and transmission oil pan from rocks and debris
• Flush fit design eliminates hang-ups when reversing

The Crawford Performance Transmission Skid Plate is inspired by the Subaru of America Crosstrek Desert Racer. Our transmission plate allows you to travel off-road knowing your trans will be fully protected from any rocks or debris the trail may throw in your way. The laser cut design assures a clean fit and provides the structural rigidity needed to keep your overland trip going. Off-road smart and keep your underbody protected today with our trans plate!

Included Components:

• Crawford Performance Transmission Skid Plate for 2017+ Subaru Impreza

Cross-Platform Compatibility:

- Crosstrek: 2018-2023

- Forester: 2019-2025

- Impreza: 2017-2023

- Outback (non-XT): 2020-2025

Installation Instructions:

Written Instructions

If you own a Subaru Impreza, you know that it’s a great vehicle for all kinds of terrains due to its all-wheel-drive system. However, being an adventure-worthy car doesn’t mean that it’s immune to damage from rough terrains and natural obstacles. When driving your Subaru Impreza through rocky roads, over bumps and steep inclines, you must protect your car’s underbody, specifically the transmission system. That’s why you need Crawford Performance 2017+ Subaru Impreza Transmission Skid Plate to protect your car’s most crucial component from damage.

The Crawford Performance 2017+ Subaru Impreza Transmission Skid Plate is designed to cover the entire underside of your car, especially the transmission system. It provides full protection against rocks, logs, boulders, and other debris that can damage your car’s undersides. It’s made from durable and high-quality materials, so you can rest assured that it can withstand the toughest terrains and obstacles. The skid plate’s design also ensures that it won’t affect your car’s handling and performance as it doesn’t add significant weight to the car. It’s also designed to fit your car perfectly and is easy to install.

If you regularly drive your Subaru Impreza in challenging terrains, it’s imperative that you have a transmission skid plate installed. It’s not only cost-effective in the long run, but it also gives you peace of mind when driving through rough terrains. Crawford Performance 2017+ Subaru Impreza Transmission Skid Plate is one of the best options available in the market. It’s designed to provide ultimate protection to your car’s transmission system without affecting your car’s handling and performance.

Crawford Performance Wiring Harness for 2017+ Subaru Impreza Lights

• Custom wiring harness designed for either the hood, mirror, or bumper light fixtures featured in the Crawford Off-Road / Overland product line
• Each variant is tailored to fit the specified application making installation easier
• Wires are wrapped in protective mesh, and race style wire plugs are used to secure the connection between the power and the pods

The Crawford wiring harnesses are custom made to fit the Crawford Hood, Mirror, and/or Bumper light setups.  The incorporated mesh sheath prevents damage or tangling, and adds a clean finish to the job. Relays and fuses are integrated into the harness, and can be mounted to the Crawford Performance Circuit Board for easy access and OEM look.

CRAWFORD PERFORMANCE INTAKE MANIFOLD SPACERS / BILLET POWER BLOCKS (BPB) & K&N CROSSTREK/IMPREZA TYPHOON COLD AIR INTAKE

FOR 2017-2023 Impreza and 2018-2023 SUBARU CROSSTREK 2.0I & 2.5I

INCREASE YOUR SUBARU CROSSTREK'S HORSEPOWER!

• ADD UP 20 HP / 25 TQ - NO TUNE REQUIRED

• IMPROVES ACCELERATION

• DECREASES DELAY BETWEEN SHIFTS WITH AT

• INCREASES THE VOLUMETRIC EFFICIENCY OF YOUR INTAKE MANIFOLD

• INSTALLS IN THREE HOURS OR LESS

• RAISES INTAKE MANIFOLD BY 1-13/16" INCHES

• STEALTH BLACK NOW AVAILABLE!

Naturally Aspirated (N/A) vehicles are starving for air without a turbo. Sure, an aftermarket Intake / Cold-Air Intake will bring more air in, but without a bigger volume in your intake manifold to receive the extra air, the air flow essentially gets choked before it has a chance to enter the engine.
 
The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. This increases the volumetric efficiency of your manifold, which provides optimum airflow so that your engine receives as much air as your intake (OEM or aftermarket) can throw at it. 

Tested on and off our Dynapack Chassis Dyno, we stacked plates up then back down until we found the sweet spot that makes your FB20 engine scream (in a good way)! 
Made from CNC'd billet 6061 Aluminum and anodized red, these spacers look incredible under the hood. The kit includes the 2 spacers, 6 longer mounting bolts, 4 Viton 75 o-ring seals, a stainless steel extended EGR tube, as well as an extended PCV hose. 
The install can be completed within 3 hours, and is rated a 6 out of 10 on install difficulty. 

Paired with a K&N Typhoon Cold Air Intake to make great power. 

Each system is paired with with a washable, reusable high-flow air filter. Featuring oiled filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions.  

A custom heat shield or air box help protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes.

Note: 
-We recommend running mid-grade or premium fuel for the best results. 
-The BPB's are compatible with OEM or aftermarket intakes, tunes, and higher octane fuels. 
-Some intakes are not legal or use on on any pollution controlled motor vehicle in -California. See the the product specifications for CARB status on each part for a specific vehicle. We only recommend this upgrade on naturally aspirated setups.
-For Off-Road Use Only 

IF YOUR VEHICLE HAS HIGH MILEAGE (~100,000 MILES), CONSIDER PURCHASING SET OF NEW INTAKE MANIFOLD GASKETS WITH YOUR ORDER. IF YOU REASSEMBLE YOUR VEHICLE AFTER INSTALLING THE BPB'S AND RECEIVE CEL CODE P050A, AN AIR LEAK FROM YOUR GASKETS IS MOST LIKELY THE CAUSE. 

INSTALL INSTRUCTIONS

2.0i: Written PDF

2.5i: Written PDF

Check out our Full Crosstrek Build Here:
https://crawfordperformance.com/pages/cpi-built-crosstrek